Meisho MS8000N Rework Station for Economy Use
Bookmark and Share
Meisho MS8000N Rework Station

Meisho's MS8000N is a reasonably cost machine, but heating power is very powerful, it is almost same as MS9000SAN model.Therefore, almost all SMD can be rework such as BGA,CSP,QFP,SOJ etc.

MS8000N BGA Rework System is an ideal repairing station for the BGA on the board. The system has the temperature profile creation of 5+1 zones in which a lead free is also possible. Top heater is by hot air system and the bottom heater is by IR wide. They are our original high efficiency heater system, and the controller is by PID high response system .Therefore, optimal lead free temperature profile is also can create easily, correctly.

Operation is friendly and all of it can be control on the screen. Furthermore, the controller has the function of interlock for safety operation. The message screen will be bringing up,If there is a important trouble, and the screen will tell the message of the failure.

Accessories
  • Board support Jig (L size x 4 / S size x 4)
  • Under board support pins system (2 rails and 4 pins)
  • Power Cable (3 cores) x 1 (approx. 5M)
  • Air Tube x 1 (6mmD approx. 3M)
Specifications
  • Board size: 50x50 - 280x400mm
  • Thickness: 0.5 - 3.5mm
  • Weight: 3Kg max.
  • Top Space: up to 45mm max.
  • Bottom Space: up to 25mm max.
  • XY Table Fine Adjust: ± 5.0mm max.
  • Moving Range: 150x200mm max.
  • Board Holder: Z Slot or Holder Jig
  • Board Support: Under side 4 pins by 2 rails
  • Z Axis: Manual Controlled
  • Repetition Accuracy: ±0.025mm
  • Adjustable Angle: Nozzle Angle Adjuster: ± 5 degrees

 
Previous Page More Machine Products